Fix Your Stuff Community Store

Guides for the Wi-Fi version of the iPad Mini 2. Announced October 22nd and released November 12th, 2013. The iPad mini 2, also known as the iPad mini with Retina Display, has all the pixels of the iPad Air in a smaller 7.9" form factor.

220 Questions View all

Options

iPad Mini 2 FPC Connector (Home Button Works but no Touch)

Hello!

I’ve just replaced the FPC connector on an iPad 2 that suffered some ‘accidental damage’ whilst in my care. I’m taking full responsibility for it, and I’ve removed, cleaned, pre-tinned and installed the new connector (to what I can see is an acceptable degree, considering it’s my first ever attempt at a job this small).

I ordered a pack of 5 connectors, burned through them all, ordered 10 more and on the first try this time I’ve managed to seat the connector fully, as far as I can tell.

I’ve restored the home button functionality, however I have no touchscreen functionality. All of the pads are A-OK, so I’m assuming I just need to touch up the solder joints on the new connector, but which ones?

I’ve looked at some diagrams of the connector, but quite honestly have no idea what I’m looking at when it comes to electronic diagrams.

If anyone has any other ideas, or knows of any common things to go wrong when replacing them that would be grand too.

Thankyou :)

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

FPC connectors can be a drag, especially when starting out. One false move and you’ve ruined yet another connector ;>). When you have completed a replacement, it’s important to use a pointy probe or tweezer and physically push against each pin. If it isn’t soldered on properly, it will move and that will be the “tell” that it needs a touch up.

For the Touch issue, check all of the pins that have “grape” or “cumulus” in the name.

Block Image

Was this answer helpful?

Yes No
Score 4

1 Comment:

Wonderful Thankyou for the advice :) I've done larger connectors for laptops and Tablets but a 2 sided connector this size is on a different planet haha

by

Add a comment

Add your answer

LDmall will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 314