Released September 16, 2016. Model 1660, 1778 Available as GSM or CDMA / 32, 128 or 256 GB / Rose gold, gold, silver, black, and jet black.

842 Questions View all

AK PRO 5 in1 Laminating Machine Bubble Problem

Hi Everyone.

I bought AK PRO 5 in 1 for Laminate iPhone Broken LCD.

The problem is the Bubble.

I try it with same Parameters suggest form reseller, but the problem is same.

I change the temperature do different setting but the problem is same.

Is someone use a same machine who suggest me something…

The setting  I use is :

Vaccum Time : 15 SEC

Lamination Time 15 SEC

Outgassing Time : 5 SEC

Debubbling Time : 6000, SEC

Temperature : 40 C.

The Modul who i use when i put the LCD inside the machine black (check the PIC)

Block Image


Thanks

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Can you set the pressure ?

Was this answer helpful?

Score 0

Comments:

@max96 Hi Marco.. solved it.. i have a bad quality oca..

I change the oca sheet, and there is no bubble now (very low quantity with bubble) Thanks

by

do you reccomend this machine ? or you know something bettere

by

è italiano lei?

by

Add a comment

Add your answer

AGS will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 27

All Time: 44