Fix Your Stuff Community Store

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1049 Questions View all

Options

Ir and Siri stop working after screen replacement

Hello,

I’ve replaced the screen of my iPhone SE, everything is working except for the IR sensor (when I make a call the screen stays on) and Siri (I can’t speak to Siri, it seems she hear a continuous noise).

I’ve used a screen bought on iFixit, is it possible I’ve connected some cable in the wrong ways, or anything else?.

Could you please help me?

Thanks,

Marco

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Did the screen you ordered come with the front camera and sensor flex pre-installed? If so, it is possible that the flex was defective or damaged.

Start by verifying your connections to insure they are sitting properly in the connectors. Then take a closer look to see if there is any damage to the connectors or the flex cable. Finally, try transferring over you’re original Front Camera flex to see if that solves the problem.

Was this answer helpful?

Yes No
Score 3

3 Comments:

Hi, I've ordered https://eustore.ifixit.com/en/Parts/iPho...

so it seems to be complete of all parts.

I'll try to reopen and check if everithing is connected well, do you know which of the thee connectors is the one for the Ir sensor?

Thanks

by

Use the original flex of the broken screen. Sometimes those circuits that send with the screen do not work. That flex can prove the two problems that it comments.

iPhone SE Front Facing Camera and Sensor Cable Replacement

right vertical connector. Step 19

by

Ok, thanks.

I'll try!

by

Add a comment

Add your answer

Marco will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 114