Formally called the Chevrolet C/K.

211 Questions View all

98 gmc 4.3l v6 oil pan removeal

i have alll the bolts that i can see from the bottom of the pan, but the pans still hung up i figured it would drop sorta easy with all the bolts out but there must be some i missed. where do i go from here?, take the trans out, the whole motor out?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Tap it gently with a small rubber hammer all around the seam. There may be a gasket that's holding it in place. Use a flathead screwdriver on the end to break the seal loose. You can also use the back of your fist and bump it loose.

Was this answer helpful?

Score 1


Careful wit the screwdriver that you do not bend the surface for the gasket, or you will have a leaky pan.


Add a comment

Add your answer

steven boomer will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 1,548