I have power just doesnt want to go

Question

2008-2013 Nissan Altima

The fourth generation Nissan Altima (chassis model L32A) was announced at the 2006 New York Auto Show on April 12, 2006. It was the first vehicle to use the smaller Nissan D platform, with a new front and upgraded rear suspension.

31 Questions View all

Question Closed

Daniellynn @stevenic

Rep: 13

1

Posted: Jul 14, 2018

Options

I have power just doesnt want to go

I have a 2008 nissan altima, i just changed the spark plugs and valve cover gasket due to finding oil in #1 slot spark plug and #4 slot spark plug. But now since it has been changed, the car will not go. We will give it gas and it will go for a min then wont go, we give it gas and it just raves up. It does go in gear fine and starts up fine it is the going part i dont understand.

Answer this question I have this problem too

Is this a good question?

Yes No

Score 1

1 Comment:

I have the same issue, after performing a tuneup on my 2012 Nissan Altima 2.5 S at around 125,000 miles I developed two different issues one was P0301 misfire on cylinder 1 and the other was code P1778 step motor function the car started by only revving up after multiple shifts from park to drive and multiple starts the car began to move but slip and rev up and that is when the P1778 code was displayed.

I ordered a stepper motor stock part JF009E and 5qt of CVT Fluid, Filter and Return Line Cooler Filter. I plan to add a guide when I replace the step motor.

Mar 9, 2019 by Phillip K

Add a comment

I have the same issue, after performing a tuneup on my 2012 Nissan Altima 2.5 S at around 125,000 miles I developed two different issues one was P0301 misfire on cylinder 1 and the other was code P1778 step motor function the car started by only revving up after multiple shifts from park to drive and multiple starts the car began to move but slip and rev up and that is when the P1778 code was displayed.

I ordered a stepper motor stock part JF009E and 5qt of CVT Fluid, Filter and Return Line Cooler Filter. I plan to add a guide when I replace the step motor. — Phillip K