Rep: 119
3
2
Samsung UN60D7000VF. Lightening ??
Black screen, no startup, only 5 double flashes of the red error light, pauses then repeats. Suspect that surge entered via the cable (on cable linked equipment failed e.g. DVR, Blue Ray player and TV) Power surge protected
Ideas?
Is this a good question?
Rep: 784.3k
1.1k
894
2.3k
Samsung officially does not use blink codes. Your case sounds like a bad power board. You do want to disconnect every input source. Then disconnect the power cable. Hold the power button for about 30-60 seconds. Then plug your TV in and try to turn it on. If that does not work you will have to take the back of your TV and take a good look at the boards. Post some good images of those with your question. that will allow us to see what you see. Use this guide Adding images to an existing question for that.
Was this answer helpful?
Thanks for taking time for helpful reply. Power button hold did not help. I will open and post some photos. Again,thanks
Past 24 Hours: 0
Past 7 Days: 3
Past 30 Days: 4
All Time: 129
