Fix Your Stuff Community Store

4-inch iPhone released in March 2016 with similar hardware specifications to the 6S. Available in Silver, Space Grey, Gold, or Rose Gold with 16/32/64/128 GB storage options. Model: A1662 and A1723

1049 Questions View all

Options

Front Camera only work , if Rear camera disconnected

Hi

I have replaced an iPhone SE screen and I have used previous front camera and sensors and home button.

After replacement for just one time everything worked properly but after that suddenly

both rear camera and front camera showing black page (don't work) :-O

I don't know what happened but now both camera (rear and front) were not working.

Just for finding the issue, I disconnected the rear camera and I turned on the iPhone, I saw the front camera in this condition work properly !!!

But when I disconnected front camera cable, the rear camera didn't work.

So "Front Camera only work, if Rear camera disconnected" and when I connecting both, none of them working

What's your idea ?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

3 Answers

Filter by:
Most Helpful Newest Oldest

Options

When putting both cameras in place on the iPhone if one of the cables is not fully connected then it's not going to work. You have to make sure the small cables are not damaged. It happened to me before when replacing the battery, I had put everything together and neither cameras worked. Then I reopened it and fully connected them and then it worked.

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

After screen replacement , I try to clean rear camera location by air duster.

I didn't use that directly to camera , I just used for cleaning place that rear camera located.

i don't know rear camera issue found problem after my action or it was not related to that.

Do you have any idea about it?

Was this answer helpful?

Yes No
Score 0
Add a comment

Options

A faulty rear camera can stop front camera and flash from working.

1, try a hard reset

2, try new camera(s)

3, board level repair.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Yes,you're right

After this issue ,both rear and front camera were not working and I had to disconnect rear camera connector to bring back to life front camera

by

Add a comment

Add your answer

Reza will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 6

All Time: 1,240