Model #: UN58H5202AF
It randomly stopped working and would not power up. There is no standby light on either. Have tried a wall outlet as well. Any ideas? Also a rough estimate of fix cost?
This is a picture of the board.
Is this a good question?
Rep: 4.1k
3
2
I am a bit concerned that the board is discolored near the top of the photo. That suggests excessive heat. Also, those diodes may require replacement. Since you don't even get the standby light, it suggests a catastrophic failure of the board. Check the main fuse for starters. Also, post a photo of the other side of the board.
Dan
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 100
