Fix Your Stuff Community Store

Released September 16, 2016. Models A1661, A1784, and A1785. Available in 32, 128, or 256 GB configurations in Rose gold, gold, silver, black, jet black, and (Product)Red.

1364 Questions View all

Options

I can't call after the repair.

I recently fixed the power button on my iPhone because it broke. But when I called after turning on the power, it became a forced boot. While looking for a problem, a fever broke out on the main board on the FPC camera side. The phone also worked when the front camera cable was removed and powered on. After repeated this process several times, it is now impossible to boot when the front camera cable is connected. Is this a problem with the front camera flex? Is it a problem with the FPC camera?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Do you see physical damage on the front camera connector on the logic board?

If not then try getting the front camera assembly replaced because if the connection to the proximity sensor which is on the front camera is damaged it will cause the phone to reboot when a call is started.

Was this answer helpful?

Yes No
Score 3

1 Comment:

Thank you!!!

by

Add a comment

Add your answer

james kim will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 65