Water damaged iPhone 6
Hello,
So i bought an Iphone 6 with water damaged. When i reiceved it - Did a ultra sonic bath to it. And cleaned with IPA after the bath. (Removed the shield to ensure accebility to every zone nicely).
After that i removed the U1501 what was shorting IC0 lines and installed a new one. The phone turned on but the backlight of the phone dissapeared ( Now i can see apple logo but no backlight) and the CPU get's extremly hot also.
So after the first attempt the phone wont boot up until i press on the CPU area and it heats up. So i am guessing i am having of a bad IC (PMIC or CPU himself) ?
Checked the backlight filter's all are good. How i can be sure if diode is good?
Is this a good question?