Second generation of iPhone. Model A1241 / 8 or 16 GB capacity / black or white plastic back. Repair is more straightforward than the first iPhone. requires screwdrivers, prying, and suction tools.

1490 Questions View all

Display not working after front pannel replacement

I just replaced the mute button and the front pannel. The display was working before the disassembly now nothing. I've disconnected and reconnected the lcd connector a couple of times already but still nothing. The phone does ring when called so I think everything else is working. What should I try next

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Flip mute switch on/off about 2x and then hold power and home button at once. Do all this while it is plugged in. Hold the buttons until you see the Apple come up, essentially resetting the phone. This is a hard reset.

Was this answer helpful?

Score 0

Comments:

Thanks for the help. It worked like a charm

by

Add a comment

Add your answer

ray3 will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 894