Skip to main content

Repair information for the Brother MFC-J6920DW wireless, multifunction inkjet printer. Model number: MFC-J6920DW. First available on Amazon in September of 2012.

23 Questions View all

Horizontal lines out of alignment.

When i print, horizontal line are a different height every 2"

Answered! View the answer I have this problem too

Is this a good question?

Score 0
2 Comments

Hello I’ve done this many times since the problem suddenly appeared - some of the nine example squares are identical so it is hard to do! The fault remains in that the printed image is in slightly offset stripes which, as I print music, is frustrating. Any ideas for a global fix? Cheers!!

by

I have been fighting this issue for months….I finally gave up and flushed the Brother printer and bought a new printer from HP. It was TOOOOOO FRUSTRATING tyring to fix with NO LUCK and NO HELP from Brother.

by

Add a comment

1 Answer

Chosen Solution

Hi @kdglover ,

Try a print alignment and check if this resolves the problem.

Here is a link. Scroll down to the section Checking the print alignment

Was this answer helpful?

Score 2
Add a comment

Add your answer

Kenny Glover will be eternally grateful.
View Statistics:

Past 24 Hours: 2

Past 7 Days: 10

Past 30 Days: 43

All Time: 4,468