The second generation HTC One—dubbed the HTC One (M8)—features a dual flash and the new Sense 6 UI, and was released March 25, 2014.

217 Questions View all

htc one m8 screen touch not working after assembly

hi guys

i deassembly my htc one m8 to replace camera after assembly the scren touch didnt work but it's display any thing

how can i do?

Update (02/12/2018)

Block Image

this is my phone

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

1 Answer

Chosen Solution

Either one of these are the cause:

- Damaged digitizer (touch screen) cable

- Damaged digitizer connector on the logic board

- Digitizer cable not seated in fully and clipped in

Was this answer helpful?

Score 1

Comments:

thank you

Which cable is the touch screen?

How can i check?

by

The orange long one in your image on bottom left is display.

The other cable that has a bit of orange on the plugin end and black on the rest is the touch screen cable.

The one right of the charging port cable and left of the daughterboard cable.

by

Add a comment

Add your answer

Cartosm anim will be eternally grateful.
View Statistics:

Past 24 Hours: 3

Past 7 Days: 11

Past 30 Days: 45

All Time: 776