Model A1419 / EMC 2806 / Late 2014 or Mid 2015. 3.3 or 3.5 GHz Core i5 or 4.0 GHz Core i7 (ID iMac15,1); EMC 2834 late 2015 / 3.3 or 3.5 GHz Core i5 or 4.0 GHz Core i7 (iMac17,1) All with Retina 5K displays

206 Questions View all

5K LCD Cable question

I recently purchased a 2015 iMac already disassembled with a cracked screen.

I purchased a replacement screen that came with the display power cable and temperature sensor. I did notice the display data cable below the FaceTime camera was empty. I also noticed the port on the motherboard was also empty. When testing out the screen without taping, I connected the display power cable and attempted to power up, Nothing!

I just need to verify that this cable is required and is in fact the missing link. The screen is the LM270QQ1 (SD)(B1), EMC 2834.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12
Spread Fixmas Cheer
Get $12 off your purchase of $50 or more with code FIXMAS12

2 Answers

Chosen Solution

You may want to review this IFIXIT guide to identify the cables iMac Intel 27" Retina 5K Display Display Replacement

Sounds like you're missing the displays data cable. Let us know if thats correct, you might want to take a picture if you're not sure.

Here's the correct screen: iMac 5K Retina LCD Display, 27inch Late 2015 A1419 - P/N 923-00093 and the data cable: Display Port Cable, iMac 5k 27inch A1419 - P/N 923-00093

Here's the FaceTime camera parts:

  • FaceTime camera P/N 923-00088
  • Camera/Microphone cable P/N 923-00091

Was this answer helpful?

Score 1

Comments:

Exactly! The replacement screen came with the display power cable installed. I moved the temperature sensor from the back of the cracked monitor into the new one. The DISPLAY DATA CABLE is MIA. I ordered the cable (P/N 923-00093). There are two cables for 2015 models. I have the late 2015 (5k Retina display). Thank you for the quick reply.

by

Add a comment

Hi Ivan, I have iMac 27 “ 5K Late 2014 without LCD, when I installed the new LCD and the new LCD Flex Cable, it does not turn on, Black screen…but with external monitor iMac works perfectly…

The two cables different for 2015 models cause the malfunction?

THANKS

Was this answer helpful?

Score 0
Add a comment

Add your answer

Ivan will be eternally grateful.
View Statistics:

Past 24 Hours: 5

Past 7 Days: 12

Past 30 Days: 37

All Time: 320