The Motorola Moto G4 is Motorola's fourth generation Moto G phone. Model number XT1625.

14 Questions View all

Soldering Temperature for Charge Port Replacement

Anyone know the temperature I should use for soldering the charge port on the motherboard? I purchased a soldering iron and it has a temperature control. I do not want it to be to hot as it will damage other parts and the board itself, then if it is to cold the solder connection will not hold.

The temp dial goes from 200-450 °C

Thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

300°-350°C.

If you are careful you won't damage other parts near the charging connector.

As you may already know it's recommended to solder with a microscope, flux to make soldering easier, wick to remove excess / old solder.

I personally use a rework hot air station to remove charging ports while insulating surrounding components.

Was this answer helpful?

Score 2

Comments:

Thank you very much. I do not have the equipment you do, but as long as I am careful I can get it. I have wick and other things. to remove the solder. Thank you again, I really appreciate it.

by

Add a comment

Add your answer

William Michael Alford will be eternally grateful.
View Statistics:

Past 24 Hours: 4

Past 7 Days: 21

Past 30 Days: 85

All Time: 603