Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2693 Questions View all

Options

iPhone Really Slow after Water Damage

Hello!

I have a 64 GB iPhone 6s, wich had Waterdamage.

The screen died cause of that, so i replaced it, cleaned the board, replaced the Lightning Connector board and Battery. after putting it all back together the phone works, but is Extremely slow. i Reinstalled the os already 2 times, but it does not get better. Thinks like the camera app take around 15 seconds to open, and boot time is Over 2 minutes.

Any solutions?

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

You may still have some residual effects from the water damage. How exactly did you clean the logic board? If you didn't remove the shields and clean it in an ultrasonic cleaner, then there is probably still some water or corrosion underneath the shields and/or the IC's.

If you did do a full decontamination, then I would check the health of the battery. As we have learned recently, a weak battery will cause the phone to throttle back the CPU and this could also be causing your poor performance.

Was this answer helpful?

Yes No
Score 2

3 Comments:

The battery has been replaced, and the board has been cleaned with 96% Ethanol in an ultrasonic cleaner

by

Did you remove the shields?

by

yes,all shield were removed

by

Add a comment

Add your answer

Karrigallu will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 6

Past 30 Days: 13

All Time: 3,824