Fix Your Stuff Community Store

Repair guides and support for your Samsung TV.

2620 Questions View all

Options

Circuit Board is Missing Copperheads to Solder Back Capacitors

I was going to replace two capacitors and the copperheads that you solder them to fell off. I was hoping I can still solder this back. Any information to do so would be much appreciated. Thank you

Block Image

Update (01/10/2018)

@oldturkey03 Hi, thanks for helping me out. Here's a few more pictures of the circuit itself and the capacitors I am looking to replace. I also included the tv model number. I sure hope I can get this working for my friend.

Block Image

Block Image

Block Image

Update (01/12/2018)

Block Image

@oldturkey03

Update (01/12/2018)

Block Image

@oldturkey03

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

@osk33 what you have here are missing solder pads. There might be a way of either bypassing those to the next component with some wire jumpers or you could try to repair them. Looks like the ground connections are totally missing but for any more detailed help you will have to give us the TV model number as well as the board number. You also want to post another couple of images of the back side of the board as well as the whole board.

Update (01/13/2018)

Block Image

@osk33 this seems to be your ASSY PDP MODULE P-Y-MAIN which would be a Samsung BN96-06519A (LJ92-01399A) Y-Main Board

Was this answer helpful?

Yes No
Score 3

8 Comments:

@oldturkey03 Sorry I am still trying to get the hang of this site. I have included more pictures of what I am trying to work on.

by

@osk33 that is starting to help. Last thing I would need is a circuit board identifier any numbers on the boards etc will help in finding the proper schematic. Power supplies are usually manufactured by other companies and thus are not always part of the service manual.

by

[image|1315526]

@oldturkey03 here's what it looks like a circuit board identifier.

by

@osk33 this seems to be your ASSY PDP MODULE P-Y-MAIN I added an image and can you verify that this is the correct board.

by

@oldturkey03 it looks like this is the same one.

by

Show 3 more comments

Add a comment

Add your answer

Oscar Santos will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 113