After changing my display screen it lights up but does not display
put new screen in it lights up but does not show any inofmation.
Is this a good question?
Score
1
45128
1 Answer
Chosen Solution
Rep: 410
9
5
2
Double check to make sure you have installed it properly.
Use this guide to help you
iPod Nano 4th Generation Display Replacement
If all is well then try plugging in to iTunes and seeing what a firmware reset does. But this will erase all data on the iPod.
Hope this helps :)
Was this answer helpful?
Score
1
I agree, sounds like a poor connection. Also check for corrosion on the cable and the connector. The 4th gen has some issues with that.
