Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2693 Questions View all

Options

home button isnt working

So I have recently repaired my Iphone 6s with a new screen. before the repair the home button was working but the touch ID wasn't. I have now replaced the screen but the home button wont respond.

I have changed the screen again as I thought it may be an issue with the long extension flex but even after replacing the screen once more the button still isn't working and I have also tried a new home button also.

Any suggestions would be appreciated please??

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

so you have tried a new home button and a new home button flex cable? You may have damaged the home button connector on the logic board, did you try cleaning the connector? Also inspect the connector magnified. Look for any damaged prongs or dirt etc in there...I'm assuming you did unplug your battery before reconnecting the screen and home button flex cables onto the board right ?

Was this answer helpful?

Yes No
Score 1

1 Comment:

I have tried a new home button with a flex cable and the new screen and yes the battery was disconnected before going ahead with the repair. I will take a look this afternoon. Thanks for the advice.

by

Add a comment

Add your answer

Matthew will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 48