Skip to main content

The ZTE ZMax Pro is identified by its black color, rear fingerprint sensor and its model name, Z981, which can be found under the rear case.

126 Questions View all

How to Remove & Replace Broken Screen?

How to repair remove a broken screen on a ZTE phone?

Answer this question I have this problem too

Is this a good question?

Score 2
Add a comment

Apple Watch Kits

Screen and battery repairs just got easier.

Shop Now

Apple Watch Kits

Screen and battery repairs just got easier.

Shop Now

1 Answer

Most Helpful Answer

All you need is some pry tools and the and a #00 Phillips screwdriver.

Phillips #00 Screwdriver

iFixit Opening Picks (Set of 6)

First take off the back of the cover using the pry tools

Then remove the Kapton tape ( it should be a yellow translucent tape )covering the fingerprint scanner flex cover

Unscrew the fingerprint scanner (mentioned above)

And finally, use the pry tool between the screen and the phone and go down the sides while simultaneously prying the screen away .

When you have the screen out, you can replace it by doing these steps in a reverse order

Phillips #00 Screwdriver Image

Product

Phillips #00 Screwdriver

$6.99

iFixit Opening Picks (Set of 6) Image

Product

iFixit Opening Picks (Set of 6)

$4.99

Was this answer helpful?

Score 1

Comments:

How to remove an replace broken screen face

by

Add a comment

Add your answer

Mona will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 15

All Time: 1,221