Skip to main content
Help

Current version by: alexbushell ,

Text:

All you need is some pry tools and the and a #00 Phillips screwdriver.
[https://www.ifixit.com/Store/Tools/Phillips-00-Screwdriver/IF145-006-4]
[https://www.ifixit.com/Store/Tools/iFixit-Opening-Picks-set-of-6/IF145-123-2]
 
First take off the back of the cover using the pry tools
 
Then remove the Kapton tape ( it should be a yellow translucent tape )covering the fingerprint scanner flex cover
 
Unscrew the fingerprint scanner (mentioned above)
 
And finally, use the pry tool between the screen and the phone and go down the sides while simultaneously prying the screen away .
 
When you have the screen out, you can replace it by doing these steps in a reverse order

Status:

open

Original post by: alexbushell ,

Text:

All you need is some pry tools and the and a #00 Phillips screwdriver.

First take off the back of the cover using the pry tools

Then remove the Kapton tape ( it should be a yellow translucent tape )covering the fingerprint scanner flex cover

Unscrew the fingerprint scanner (mentioned above)

And finally, use the pry tool between the screen and the phone and go down the sides while simultaneously prying the screen away .

When you have the screen out, you can replace it by doing these steps in a reverse order

Status:

open