Fix Your Stuff Community Store

Movies, music, multimedia in your home. Use our guides to repair home entertainment devices from surround sound A/V receivers or conventional stereo receivers to power amplifiers, preamplifier, speakers, and iPod/Bluetooth speaker systems.

4602 Questions View all

Options

Why can I only get some to one area of my house

Why can I only get sound to one area of my house

We have a Onkyo audio video control tuner amplifier

TX – SV727, space TX – SP 727 R

The sound system will give sound to the rear of the house, but not the front of the house. When I switch the wires in the back of the unit I can get sound to go to the front of the house, but the other connectors don’t work to send sound to the back of the house, which tells me my house wires are ok but the unit has a problem.

I cannot find an electronic repair place close to me. Does this sound like something I can fix myself?

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0

1 Comment:

Steve,

Thank you so much for your input. You were spot on the bypass was not the problem. The problem was that there were loose wires in the back. I thought I had reattach them sufficiently, but after much fooling around with the receiver and speakers we have them all functioning.

Thanks again for your help

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

Awesome job on diagnosing the actual issue. Without pulling it apart it is hard to tell if this could be an easy fix. I'd assume some light soldering may be needed. Without experience I would watch some youtube videos for advice and tips.. Having light hands is the biggest one.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Molly Cowgill will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 38