Fix Your Stuff Community Store

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

Options

iPhone lcd circuit theory

can any one explain how iphone display circuit theory?

yesterday i got a phone6 no backlight no image. when check lcd connector oxide on image rail. after remove oxide backlight+ image comes.

i want to know why no backlight if image line problem?

Update (01/01/2018)

still no answer.

why if no image no backlight??

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0

1 Comment:

@refectio @teetopp any idea what might be going on here?

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

The iPhone 6S has a very sensitive backlight circuit. It doesn't take much more than a misaligned connector while the battery is connected to blow the backlight filter (ferrite bead). If a phone was water damaged, all it takes is a tiny amount to short the adjacent contacts on the LCD connector (PP_LCM_BL_ANODE_CONN & GND) to cause the same effect. You might not even see any after effects of the water other than the red LDI.

The Touch IC on the iPhone 6S, now embedded on the screen assembly, replaces the CUMULUS & MESON IC's from the iPhone 6/6P and include the added Force Touch functionality.They wouldn't normally have anything to do with a screen not producing an image.

As for the LCM_Panic line, it appears to be the same thing as the PMU_TO_PHOTON_ALIVE line from the iPhone 6. They both originate from the PMU and are part of the Display Control Signals going to the screen.

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Mohammed Irfan will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 353