Rep: 1
1
It has new batteries and I replaced some of the corroded wiring. Guy had it and said ran fine and then just stopped one day. No clicking sound when pressing pedal or anything and batteries are good? Help please
Thanks
Is this a good question?
Rep: 784.3k
1.1k
894
2.3k
Blake Lowe check your power wiring with a multimeter. Start with your ignition switch work and check for power on the switch, the direction selection switch etc. Check your solenoids since they are the ones that usually do the clicking....
Let us know what and where you checked and what you found.
post some images of those things that look odd or require further investigation. Use this guide for that Adding images to an existing question that way we can see what you see.
Was this answer helpful?
I will do that. Thank you!
Beside the solenoid there is some sort of small switch possibly to do with throttle? I know there’s at least two wires running to it any idea what that is
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 1
All Time: 117
2 Comments
Blake Lowe any idea about make model and approximate year for your cart? where did he corroded wiring come from? What do you get going at all? Batteries are fully charged and good for sure?
by oldturkey03
Ez go 1994 36 volt not sure on exact model. There was some corrosion from ignition switch wire to battery and some of the battery to battery wiring. Changed them out with some 4 gauges. I can’t get it to do anything though the guy said he put it on a jack and tested it and wheels rolled fine. But I’m not hearing a clicking. Batteries are fully charged according to the charger and tester.
by Blake Lowe