Fix Your Stuff Community Store

Version 2 of Parrot's toy quadcopter with HD camera, controlled over Wifi by smartphone.

24 Questions View all

Options

AR drone 2.0 board to board connector - need to solder it back

Hey,

So today I flew my ar.drone 2.0 around and had a crash.

After the crash I got "PIC watchdog emergency" notification on the screen.

Disassembled the thing and noticed that the board-to-board connector partly chipped off the PCB taking some of the solder pads with it.

Has anyone had similar issue or experience with fixing the ar drone 2.0 PCB?

Are there any PCB schematics on the Internet? I didn't have luck with finding any.

Thanks in advance!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

@tomek_l there are no schematics of it yet. It is extremely difficult to find anything repair related on any drone. In your case I'd suggest you contact a good microsoldering business (this will depend on where you live etc.) and have them take a look at it. Sometimes traces can be rebuild and the experts can almost always come up with a fix. It might also help if you post some images of your damage with your question. For that use this guide Adding images to an existing question

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

Tomasz Lewicki will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 170