broke the corner of the clip that roates 90 degrees to hold the LCD screen doing a click wheel replacement. now the screen is white. music plays when i hook it up to car. would the broken clip cause the white screen? do i need to replace the logic board or is there a way to fix just that part? thanks
Is this a good question?
Rep: 784.3k
1.1k
894
2.3k
@glennzes yes it would since it is the clip that exerts downward pressure and closed the contacts from the connector to the cable. You could get a good microsoldering professional to exchange the connector (difficult to find). A more economical repair would be the replacement of the logic board. I have a couple of boards like that myself and sometimes applying pressure with a good piece of silk tape can get it revived but definitely not a lasting repair.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 10
All Time: 152
