Rep: 57
3
2
During NAND flash upgrade procedure, I accidentally pushed a small component off of the logic board. I need to identify it's function so I can put it back on in the right direction. See below for picture, I couldn't figure out how to upload picture to original question.
Here is part:
Is this a good question?
Rep: 221.4k
15
289
807
This is C0617. It's a 10UF/6.3V/20% X5R capacitor in a 0402 package. There is no specific orientation as it is not a polarized cap.
IMHO, if you are going to be doing any kind of micro-soldering, you really should have the schematics on hand. There easy to find on Google.
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 2
Past 30 Days: 2
All Time: 101
1 Comment
Great, thanks a lot))))
by miriamgreen