Released September 25, 2015. Model A1688/A1633. Repair of this device is similar to previous generations, requiring screwdrivers and prying tools. Available as GSM or CDMA / 16, 64, or 128 GB / Silver, Gold, Space Gray, or Rose Gold options.

873 Questions View all

Screen is black after repair but still on. Help?!

So I was repairing a cracked screen on an iphone6s, but before beginning I forgot to shut off the phone, I did disconnect the battery however. Then once I finished the screen is black and won't turn on with the power buttons. It occasionally flashes the screen for a second but then it goes black again. I am able to answer calls and charge it and it is definitely on but it doesn't show dor nor than the rare second. PLEASE HELP ASAP I NEED TO RETURN THE PHONE BY TOMORROW!

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

I keep extremely good care off which screw goes where so it's definitely not long screw damage.

by

Add a comment
Black Friday
Broken doesn't stand a chance.

1 Answer

Chosen Solution

The iPhone 6S is prone to backlight circuit issues when the screen is connected with the battery or power on the device.

Have you tried re-installing your original, cracked screen? If that one works, then you have a bad replacement screen. If the original also has the same problem, then you probably blew the backlight circuit somehow.

Was this answer helpful?

Score 3

Comments:

What do I do if the backlight circuit is blown

by

A blown backlight circuit requires a micro-soldering repair and is not a DIY fix. You will need to tell your customer that there will be a delay and find a reputable shop to do the repair.

by

Add a comment

Add your answer

Nick Genco will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 46