Clear image, but no touch...its not the LCD and its not the connector.
Hey everybody!
I have an Iphone 6s here with no touch...I tried two good known displays (have an other Iphone 6s here to test it) but no luck. Also I soldered the second new connector now...everytime same result, clear image but no touch...
I know, that the Touch-IC itself is on the display, so what should I check for next step now? On the connector, only the right-side is for touch, right? So I checked all filters, wich are belong to the pins of the right-side of the connector, but all have continouity...
Hope you can help me guys,
thank you ;)
Is this a good question?