Optical Drive Laser pot value
Hello. Can someone please add the poti values ? From the optical drives / lasers ?
Is this a good question?
Hello. Can someone please add the poti values ? From the optical drives / lasers ?
Is this a good question?
@thesupport you are not very specific about which values you are looking for. You usually would require an oscilloscope to adjust those post properly. You can of course use values that have been obtained from experience by others. IMHO this is the best site for that.
Was this answer helpful?
Agreed, but don't forget that the service manuals also provide information on the tuning of the pots.
Past 24 Hours: 3
Past 7 Days: 7
Past 30 Days: 19
All Time: 633