Skip to main content

Repair information and guides for the iPhone 6 Plus that was released on September 19, 2014. Model: A1522, A1524

1526 Questions View all

Turns on to apple logo then turns off after screen replacement

Hi so I've had this phone sitting in my cupboard with a broken screen for a little under a year, I got a new screen put on it, let it charge overnight and turned it on. It lit up to the white screen with the apple logo and then it turned off after about 8 seconds and this is all it does. It dosen't get picked up by my computer either :// Someone please help me out :')

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

1. Do you have Original Apple Cable ?

2. Did You try to enter into DFU Mode while connecting iP to Comp

3. Did You Tried to connect Your phone with Comp when screen is pluuged off ?

4. I can suggest You to connect it to another fully working CPU, sometimes it help

5. Was it Your first screen replacement ?

Was this answer helpful?

Score 0
Add a comment

After replacing the LCD screen, you use a longer screw to install conectors protecting the sheath

Block Image

Block Image

. It causes damage to the logicboard

Block Image

. Your troubles are similar to the "blue" screen trouble on the ip5s. I am a technician specializing in repairing broken glass display LCD's iPhone and have encountered this case many times, and have found the cause, overcome the above error.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Joseph will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 8

All Time: 1,231