Epson EB450W no power after replacing auto iris
Opened it up replaced auto iris part reattached all cables etc but now NO power. Ideas?
Is this a good question?
Score
0
405875
1 Answer
Chosen Solution
Rep: 784k
1.1k
894
2.3k
@famreeks here is what the manual looks at when it comes to power on your projector
Of course you do want to absolutely be sure that you have connected everything properly after your repair. there should be a fuse either on your power board or the MA board. It might help if you can post some good images with your question. Use this guide for that
Was this answer helpful?
Score
1
