Rep: 23
1
I was given a 1998 Honda Accord. They originally had installed a kill switch. Someone came and pulled it out. Now I just have a mess. I don't know where to start or how to begin to get the car started again.
Can someone give me a suggestion?
Is this a good question?
Rep: 784.1k
1.1k
894
2.3k
Erika D'Armas this could be simple or difficult. It will all depend on what you have. and where those wires were cut. I'd try to attach the cut wires by color first. you can simply splice them and wrap with electric tape until you know it works. Consider posting some good images of the mess you are looking at. Use this guide for that. It will allow us to see what you see.
Check on some of those
from here
Once you can show us more and let us know if it is a 4cyl or 6 cyl AT or manual transmission, I am certain that we have a complete wiring diagram available somewhere.
Was this answer helpful?
@oldturkey03 I've added a few pictures. Not sure if you can see what's going on.
Erika D'Armas looks like a bit of a mess :-) Let me see which once of the wiring harnesses this is. I do have all the proper schematics just need to determine which one it is.
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 13
All Time: 1,162
