Fix Your Stuff Community Store

Repair information and guides for the iPhone 6S released by Apple on September 25, 2015. Models: A1688, A1633

2692 Questions View all

Options

Home button connector part number?

I yanked the home button out of an iphone 6s to use for a project. And I wanted to know what the connector at the end of the flex cable is. A type would be great and a part number would be even better. Im a MechE so electrical engineering is still somewhat basic for me. I noticed the connector has I think 14 contacts total? it looks like 5 sets are used for signals and the other 2 sets might be for ground/power supply. Any help/insight is much appreciated! thanks!

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0

3 Comments:

Is it the cable coming from the home button itself, the long cable that is attached to the large metal plate behind the screen or the connector on the board that connects to the home button extension cable?

by

Its the one that is coming from the home button cable itself...NOT the long flex cable that it attaches too which goes to the large metal plate. But that one would work too I would think because it would be its mating connector.

by

Does anyone have any thoughts?

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest

Options

The home button part number should be the one on the bottom of the cable sticking out of the side of the home button. It is fairly large and you should be able to see it easily.

Was this answer helpful?

Yes No
Score 0

1 Comment:

Thanks for responding. I was hoping to get the connector part number (or at least type of connector), not the home button part number. The number on the flex cable gives me the whole assembly but not the connector component.

by

Add a comment

Add your answer

tim will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 2

All Time: 50