Rep: 13
1
Recently replaced the USB and headphone bar as well as a new battery. Did this in two stages. While doing it I accidently pulled the battery cable too hard and loosened the receiving end that is soldered to the board. Now in spite of new battery and solid USB connection can not get the battery to charge. Can this be fixed? If not. Would getting a new motherboard solve it. Thanks.
Is this a good question?
Rep: 101.2k
8
172
358
@maril, Marilyn , Battery connector may be able to be repaired, but will take some one experienced in micro soldering. Try taking it into a good local cell/computer repair shop and have them take a look and estimate repair. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
thx for such promptness.... will go in search of an expert per your suggestion. What a great site this is and it is people like you who make it that way!
@maril, Marilyn Thank you also, since this is totally a volunteer site getting comments back like your's makes it worth while. Good luck with your Nexus 7.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 63
