Rep: 1
1
why my iphone 6 cpu get hot and it does not power on after changing nand flash and eeprom. that phone is icloud lock bt i orderd the baseband +nandflash+ eeprom i sucsessfully changed nand epprom and baseband bt after that i power on the phone the cpu gets hot like !&&* please help me out...
Is this a good question?
Rep: 16.1k
39
92
13
The solder expanded under the underfill and created a short. You will need to replace the CPU now too. @refectio can probably explain it a lot better than I can lol
Was this answer helpful?
That sums it up pretty nicely!
if i will change my cpu then it will be get power on and everything will be fine after that ? and what about if i will reball the same cpu and fix it again please reply fast..
If you Reball the CPU it will work.
hey friend i tried removing the cpu and bymistake i removed the tracks that on logic board where where cpu balls set any idea how to fix it ??
You will need aboard view to see what they go to, use PADS and a pcb file and click on the pad to see what it does.
hy, friends, i also meet this error about my iphone, i get many help from this forum, and also bought many DIY repair tools from china supplier (vipprogrammer.com), and still haven't fix this error,
Was this answer helpful?
The CPU is defective, Reball or replace and it will work.
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 2
All Time: 790
