Fix Your Stuff Community Store

Options

Analog Transmission Static. Aux port works fine.

Hey team!

::So im looking in to a failure in a RF transmitter headset.

::I plug my iphone in VIA Aux cord, and the sound transmits flawlessly, but when i plug a device in using the component cables, i have a huge amount of static, and extremely low range. (maybe 3ft)

::channel 1 sounds like i left the range of a radio station, giving me the occasional sound from my TV

::channels 2-3 dont produce any sound.

also, i

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Scott try a different set of component cables. If that does not work you'd have to open up the unit and see if you see any obvious damage. I am not sure how much difference there is between the RF875R and your unit but you could try and check it the same way. Post some images of your unit once you have it apart. Use this guide for that. It will allow us to see what you see.

Block Image

Was this answer helpful?

Yes No
Score 1

1 Comment:

hey! I stripped the wire that was operating as an antenna, and wraped a single thread wire around it until it was doubled in thickness. taped it up and put it back together. signal works fine now. thank you for the response though! i appreciate it.

by

Add a comment

Add your answer

Scott will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 90