Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all

iPhone 6 overheating and causing the display to malfunction?

Ok, in December of 2015, I dropped my phone. Instead of cracking, the LCD stopped working and, a smell was being emitted from the phone. Still under warranty, I took it to apple and received a new phone. They said it was a software failure. Now, I have been using that phone ever since. Today, just about an hour ago, I had my phone in my pocket. I pulled it out to check the time but, it would not turn on. I immediately took it out of its case to get a closer look. I got a whiff of the same smell I had smelled almost a year and a half ago. I figured the worst. When I got home, I plugged it in and did a hard restart and, to my surprise, it turned on, thankfully. Now, I was wondering if anyone else has experienced this issue and, knows what it is. Thanks you.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

iPhone 6 and 6+ are notorious for their weak frames. It wouldn't be out of the realm of possibility somethings gone wrong with the chips on the logic board. Since everything is fine, I wouldn't go out of my way to do anything. Plus your out of warranty. The only thing Apple will do is advise you buy a "new" one for $299 and give them your current phone

Was this answer helpful?

Score 4
Add a comment

Add your answer

Conrad Gausmann will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 6

All Time: 377