Electrical problems ( not turning over at all)

My ride on won't turn over at all

Battery fully charged

Key switch checked and is fine

Ive tried to unplug safety switches and then try to start but nothing.... does unplugging bypass the switch or is that just stopping power flow altogether? Can I bypass them in anyway?

Ta.

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

Thanks for this

Got it going

by

Add a comment

1 Answer

Chosen Solution

@tonycohen ,Tony, Check the starting circuit for a fuse and test the solenoid with DVOM. You may have stopped your mower from starting by unplugging the safety switches. See how to diagnose electrical/starting problems in the links below. Shows testing of safety switched,solenoids,etc.. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

https://www.youtube.com/watch?v=AZQpzeZI...

https://www.youtube.com/watch?v=pDCJKIYL...

Was this answer helpful?

Score 3

Comments:

@tonycohen,Tony, That's great your up and running, thanks for replying back, Good luck with your Victa.

by

Add a comment

Add your answer

Tony will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 27