My ride on won't turn over at all
Battery fully charged
Key switch checked and is fine
Ive tried to unplug safety switches and then try to start but nothing.... does unplugging bypass the switch or is that just stopping power flow altogether? Can I bypass them in anyway?
Ta.
Is this a good question?
Rep: 101.2k
8
172
357
@tonycohen ,Tony, Check the starting circuit for a fuse and test the solenoid with DVOM. You may have stopped your mower from starting by unplugging the safety switches. See how to diagnose electrical/starting problems in the links below. Shows testing of safety switched,solenoids,etc.. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
@tonycohen,Tony, That's great your up and running, thanks for replying back, Good luck with your Victa.
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 9
All Time: 160
1 Comment
Thanks for this
Got it going
by Tony