The Xbox 7MN-0001 Wireless Controller, was manufactured by Microsoft Corporation. It is the first generation Xbox One controller released, but has since been discontinued. This controller has since been supersuded by Models 1697/1698 and Model 1708. While this controller is commonly used with the Xbox One, it can also be used for PC gaming.

85 Questions View all

Xbox one Controller wont turn on.

I recently tore apart my xbox one controllers to replace the buttons and the front faceplace on the controller. Now that I have put it back together the guide button will not turn on the controller. When I hold down the guide button in a certain spot it turns on, but once I release it shuts off. When I plug it into the console it turns the controller on but the guide button doesn't work. On one controller the vibrator disconnected from one side, could this be relative to the problem?

Answer this question I have this problem too

Is this a good question?

Score 1
Add a comment

1 Answer

Most Helpful Answer

Try to take it apart again and put everything back. You may have broken or moved something. Put it back to the original config and see if it works, if it doesnt, there could be another issue.

Was this answer helpful?

Score 1

Comments:

The only button that doesn't work is the guide, which is using the original button.

by

Open it, remove everything and put it back together with the original parts

by

I took mine apart the give the case a clean because it was looking dirty, I put it back together again which was easy, but now the batteries wont work in it, only the power cored connected works, its strange because there is nothing been touch on the main board I just cleaned the case does anyone have any ideas???

by

@napalm150 Take it apart again and see what happens

by

Add a comment

Add your answer

FP05 will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 14

All Time: 85