Skip to main content

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117 Questions View all
Question Closed

Processor

Is it possible to exchange the Processors from a Logic Board that has a 500MHz Processor on it with a 700MHz Processor

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Most Helpful Answer

Hi! Unfortunately, no, it's not possible, because the processors are not plug-and-play, and are instead connected directly to the logic boards. It may be possible if you are an expert at soldering, but even then it would be a very involved and risky procedure, likely ending in the boards being destroyed and unusable.

Considering iBook G3 parts machines can be had for $20 these days, I'd go that route in order to get a faster board.

Was this answer helpful?

Score 1
Add a comment

Ok thanks the reason why I was asking is because I have the Graphics issue on the 700MHz on that I have and so far nothing is working to fix it

Was this answer helpful?

Score 0

1 Comment:

I hear ya. Unfortunately there is really no permanent fix for the iBook G3 video issue. Coleen Thompson (one of the people who answers questions on this site) posted a link to an eBayer who does soldering to fix the issue, and he may do a good job, but generally soldering of this sort comes undone eventually, and you can practically buy a working replacement machine or at least a working board for the cost of the procedure.

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 863