Gaskets for kitchenaid blender.
I need the 2 gaskets that are in the blades assy . How can i ?
Is this a good question?
Score
0
388334
1 Answer
Chosen Solution
Rep: 451.4k
11
367
1.4k
Hi,
Here is a link for the seals, click on page A/B.
Here is one seal
part #4 on page B
Scroll down to B-4 to view the part.
Here is the other seal part #7 on page A
Scroll down to A-7 to view the part.
Hopefully this is of some help.
Update (04/03/2017)
Hi,
It seems that the blade assembly comes as a complete unit.
Sorry I though that these were what you wanted.
(click on images to enlarge for better viewing)
Was this answer helpful?
Score
3
when taking off the blades from the blades assys you see 2 gaskets. 1 on every side of the housing. you dont see them on the chart.
you dont see the gaskets on the chart .
Hi,
Perhaps you will have to make your own.
Just search for 'food grade' gaskets for suppliers. Here is one supplier perhaps
There are 2 gaskets on the blades axle . For some reason they are not shown on the chart but they are there .
