When the wash is finished the light inside the washer stays on Then when you want to do another load the washer will not turn on. I have to unplug the washer wait a few seconds plug it back in and them it will turn on.
Is this a good question?
Rep: 101.2k
8
172
358
aswanson63 , You are not alone with this problem, see the 1st link below that discusses this issue and then you may want to do a search using your(make,model#,recall) to see if something pops up. It maybe a loose/corroded/burnt connection to the power control board/central control unit or the POC/CCU itself may be faulty. Use the 2nd link below to a service guide for Kenmore Elite HE3 Washing machines, It will show trouble shooting of codes and tell you how to put the washer into diagnostic mode to run the test and may confirm the fault. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 14
Past 30 Days: 69
All Time: 14,797
