Fix Your Stuff Community Store

Repair information and guides for the Apple iPhone 5s that was announced on September 10, 2013. Model: A1533, A1453, A1457, A1528, A1530, A1518

3530 Questions View all

Options

replaced iPhone 5s screen but now it won't display

Hey guys I'm stumped on this one !

I shattered my screen on my iPhone and it was no biggie because I replaced like 12 of these screens in the past with no issues. this phone is being a pain in my a**, I replaced it and went to turn it on but noting showed up, so I connected it to iTunes and it recognized it and then I grabbed one of my customers 5s and tried the screen on it and it was 100% fine . I put the screen back on my phone and still no luck so I'm a bit stumped, any thing is helpful at this point.

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

@dobos1,Jerod , Try cleaning and check the connector on the board for bent/damaged/missing pins and use a magnifying glass to look at the board for loose /damage/missing components/capacitor/etc. Good luck. I hope this helped you out, if so let me know by pressing the helpful button.

Was this answer helpful?

Yes No
Score 2
Add a comment

Options

Either the display is defective or you fried the backlight driver by connecting the display while the battery was not disconnected.

Was this answer helpful?

Yes No
Score 1

2 Comments:

If the backlight driver became fried can I salvage this part from another iPhone 5s or is it not worth it?

by

You can salvage it, but you also need to reball the salvaged one

by

Add a comment

Add your answer

Jerod will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 59