Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4993 Questions View all

Bluetooth and WiFi issues

Hi,

I have been having issues for a while with the WiFi and Bluetooth on my iPhone 6. I have previously posted regarding this but didn't receive much in response.

The issue is very low signal for WiFi (2G) and seemingly non-existent signal strength for Bluetooth. I have tried taking the phone to pieces and putting it back together thoroughly as suggested but this hasn't yielded any success.

I assume the next step is the replacement of some of the hardware. Could someone please explain the best part to replace first?

Thanks a lot!

Duncan

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Hi,

If your i6 's wifi is good near the router, you should replace wifi antenna first. Usually solved this problem.

Was this answer helpful?

Score 0

2 Comments:

Seeing as they're fairly cheap. Would you recommend doing both the antenna and the flex cable at the same time to save taking apart the phone twice?

Thanks for your help

by

Add a comment

Add your answer

Duncan Wooder will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 157