How to adhere broken plastic leg securely back on?

I have a Euro-pro TO1612 toaster oven. The front left leg broke off. I have tried several ways to glue together (super glue, gorilla glue, contractor's glue) all to no avail. The front and back legs are on the same plastic strip, so gluing some kind of way would be greatly appreciated, rather than trying to replace part which is nearly impossible to find help with. Any ideas?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

@sparkie71 , Anne, If under warranty, try having repaired/replaced/refund under warranty. If not warranty eligible, A 2 part epoxy Glue has always worked well for me, remove all remnants of the other glues you have tried first if you can, roughen both surfaces in the area to be glued and be generous with the glue, then follow the instructions of the 2 part epoxy to mix and set. After dry apply epoxy around the outside of break just to add a little additional strength. Good luck.

I hope this helped you out, if so let me know by pressing the helpful button.

Was this answer helpful?

Score 1
Add a comment

Add your answer

Anne will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 25