With the gear shift indicator/odometer staying on all the time, this causes a parasitic draw. Is there a relay that controls this function or would it be in the circuit board?
Is this a good question?
Rep: 101.2k
8
172
358
kenwhitlock1 , Check under hood for wire harness excessively wet or corroded around connections and fuse box. If all looks good, from a lot of forums I checked, it could be a problem with the (GEM) Generic Electronic Module. Locate the GEM (link #1) and check it for excess moisture/corrosion/connection also. Test can be ran by a good Technician to check circuits going to GEM to see if it is bad. Link #2 mentions a TSB on a like problem also.Good luck.
I hope this helped you out, if so let me know by pressing the helpful button.
Was this answer helpful?
Thank you very much for your response. Not only the response but the supporting documentation and video. You've been very helpful.
kenwhitlock1, Your welcome. Thanks for replying back and have a good day..
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 4
All Time: 3,280
