Spilt Milk On My MacBook Pro :'(
So I spilt an entire cup of milk, let it sit for a few days, cleaned it out with alcohol, and now i just turned it on to see what damages had occurred.
The keys are obviously sticky, but i didnt clean them, because whats the point if I dont know if i could even use the computer.
Everything that i know doesnt work:
1. Battery doesn't charge,
I connected the mac to external display and boot it in safe mode, checked the system report and says the battery health is 44% and is at around 350 cycles. Says it needs to be replaced asap.
2. The screen
It's glitching out, its weird, I start the computer up, and wherever its dark screen it has noise, kinda like old TV sets that weren't on a channel. When i boot it, a apple logo with a bar comes up, the apply logo is continuously glitching pixel lines out, then the login shows for a few seconds before the screen just goes to black(its still on just black).
I am wondering what could be wrong with the screen, im thinking maybe the graphics card or the logich board, but why would that shut the screen off?
Also when i connect it to external display, the screen doesnt seem to shut off when i mirror the displays, at least for a few minutes.
When i disconnect the external display, the mac screen stays on for a few minutes before going to a turned on black screen.
I have done PRAM, SCS tests and disk utility everything seems to be working ok, except the glitchy-lines screen and the battery is done.
Any advice?
Is this a good question?
2 Comments
We really need to know your EXACT machine.
by mayer
I also just noticed I have bleeding at the bottom of the screen. I also found that there was some dried milk where the hinge is attached to the screen, could there be some wires or things in the black hinge that could have been water damaged if it seept through? http://imgur.com/ZWpeacS
Also its a 2014 model.
by Denis