Replace wheel module of Samsung NaviBot-S SR8980
Is it possible to remove wheel module without full disassembly of device? I tried to remove 3 bolts, but module don't goes off.
Is this a good question?
Is it possible to remove wheel module without full disassembly of device? I tried to remove 3 bolts, but module don't goes off.
Is this a good question?
Just pull it off with a little force. The module is plugged into the board so be sure to unplug it straightly upwards.
Was this answer helpful?
Dan met fijne platte schroevendraaier oplichten tussen kraag en behuizing.
Tandwielreductie, motor en wiel heb je dan als 1
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 2
Past 30 Days: 3
All Time: 490